1,177 - 1,204 of 27,110 Listings
All
Lot # 12796
2008 JOHN DEERE 612C
Row Crop Headers
Auction Ended:Wed, Sep 30, 2026 12:58 PM (CDT)
Number of Rows: 12
Row Spacing: 76.2 cm
Rolls: Knife
Serial Number: H0612CC725176
Condition: Used
Chopping Capabillity: Chopping
Description: 2008 John Deere 612C Stalkmaster corn head, 12x30, chopping, single point hookups, header height sensors, safety lights, stubble lights, BEFORE DRI...
Updated: Wednesday, September 30, 2026 01:15 PM
Location: Huntington, Indiana, USA
Seller: Ayers Machinery
Number of Rows: 6
Row Spacing: 76.2 cm
Rolls: Knife
Stalk Stompers: Yes
Serial Number: 21708
Number of Stalk Stompers: 6
Description: 2008 Drago 6-30 chopping cornhead, Headsight header height control, end row augers, 6 stalk stompers. Head was used on a CaseIH 2577. Owner purchas...
Updated: Wednesday, September 30, 2026 01:14 PM
Location: Kirkland, Illinois, USA
Seller: Hall Auctions
Lot # 10580
2014 DRAGO 1230 II
Row Crop Headers
Auction Ended:Wed, Sep 30, 2026 12:56 PM (CDT)
Number of Rows: 12
Row Spacing: 76.2 cm
Rolls: Knife
Serial Number: 2142214
Condition: Used
End Row Augers: Yes
Description: 12R30, SERIES II, PAINT #7, LONG DOWN CORN AUGERS, 3 SENSOR HS, CHOPPING, ROLL KNIVES 40%, RED POLY, NICE STRAIGHT HEAD
Updated: Wednesday, September 30, 2026 01:13 PM
Location: Mason City, Iowa, USA
Seller: Mason City Red Power
Lot # 11376
2005 GERINGHOFF RD1230
Row Crop Headers
Auction Ended:Wed, Sep 30, 2026 12:54 PM (CDT)
Number of Rows: 12
Row Spacing: 76.2 cm
Rolls: Chopping
Serial Number: 925251230
Condition: Used
Chopping Capabillity: Chopping
Description: 12r30 RotaDisc, no gathering chains, no window kit, good poly, good gear boxes, head cart not included
Updated: Wednesday, September 30, 2026 01:10 PM
Location: Plymouth, Indiana, USA
Seller: 3130 Equipment Co.
Lot # 3988
2019 JOHN DEERE 745FD
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:54 PM (CDT)
Width: 13.72 m
Cutterbar Type: Flex
Contour: Yes
Serial Number: 1H0745FDTJ0805034
Condition: Used
Fore/Aft Reel: Yes
Description: 2019 John Deere 745FD 45 FT,Flipover Reel,Off Ground Sensors,Belts Like new,Ready To go to the Field,Can Load and/or set up Delivery
Updated: Wednesday, September 30, 2026 01:10 PM
Location: Leola, South Dakota, USA
Seller: Spring Creek Equipment & Rental
Lot # 9797
1988 GLEANER HUGGER 630
Row Crop Headers
Auction Ended:Wed, Sep 30, 2026 12:53 PM (CDT)
Number of Rows: 6
Row Spacing: 76.2 cm
Rolls: Standard
Serial Number: 063013110R8989
Condition: Used
Chopping Capabillity: Non Chopping
Description: 1988 Gleaner Hugger. 6 Row, 30" Spacing, Lateral Tilt
Updated: Wednesday, September 30, 2026 01:09 PM
Location: North Star, Ohio, USA
Seller: North Star Hardware & Implement
Number of Rows: 6
Serial Number: Y9S018752
Condition: Used
Description: Case IH 3206 6-row corn head. Recently replaced gathering chains and sprockets. Upgraded to 8-row and no longer needed. Located in Ridgeway, IA. Ca...
Updated: Wednesday, September 30, 2026 01:08 PM
Location: Ridgeway, Iowa, USA
Seller: Mark Arends Auctioneering
Serial Number: 003088
Condition: Used
Description: Case-IH 1063 Corn Head. 6 row 30 in., good chains, sprockets and knives, field tracker, seller states that one of the sensors is not working. Thi...
Updated: Wednesday, September 30, 2026 01:04 PM
Location: Percival, Iowa, USA
Serial Number: HAJ0002779
Condition: Used
Description: Poly snouts no cracks
Can be fixed up or used as parts
Has a square frame and no dents
Updated: Wednesday, September 30, 2026 01:03 PM
Location: Danville, Kentucky, USA
Seller: Prewitt & Sons Auctioneers
Width: 13.72 m
Contour: Yes
Serial Number: 278676-15
Condition: Used
Stock Number: E00642588
Poly Skid Shoes: Yes
Description: As Is, CaseIH AFX Adapter, No Transport, Auto Contour, Telescoping Drive, Needs New Sickles, Small Hole in LH Draper, Three Center Drum Fingers Mis...
Updated: Wednesday, September 30, 2026 01:02 PM
Location: Wishek, North Dakota, USA
Seller: Titan Machinery - Wishek
Lot # 3094
ALLIS-CHALMERS 240E
Row Crop Headers
Auction Ended:Wed, Sep 30, 2026 12:44 PM (CDT)
Serial Number: 5567440690
Condition: Used
Stock Number: 17
Description: Allis Chalmers "240" 2 Row 36" Combine Head. For additional information contact Tom@
Updated: Wednesday, September 30, 2026 01:00 PM
Location: Clarkson, Nebraska, USA
Seller: Highmark Auctions
Serial Number: 083020059
Condition: Used
Description: This Gleaner 830 has 8 rows with 30" spacing. Good working head this came to us from someone local that is retiring.
Updated: Wednesday, September 30, 2026 12:59 PM
Location: Greenwich, Ohio, USA
Seller: J Star Equipment
Width: 4.88 m
Cutterbar Type: Rigid
Serial Number: PIX180032
Condition: Used
Stock Number: SBA1288
Description: Pixall 1800 VPC II 16' Hydraulic Bean Header with Stainless Steel Adjustable Concave, Constant Angle Plant Aligners, and Stationary Reel. Asking $3...
Updated: Wednesday, September 30, 2026 12:57 PM
Location: Green River, Utah, USA
Seller: SellBuyAuction
Lot # 7787
2018 MAC DON FD75
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:39 PM (CDT)
Serial Number: 325805-18
Condition: Used
Stock Number: TR0890
Description: * Mac Don FD75 Flex Draper
* JD S-series adaptor
* Double knife
* Double finger reel
* Height sensors
* In cab switch
* 45' wide
* John Deer...
Updated: Wednesday, September 30, 2026 12:55 PM
Location: Tower City, North Dakota, USA
Seller: NorthStar Ag
Lot # 7836
2018 MAC DON FD75
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:39 PM (CDT)
Serial Number: 325802-18
Condition: Used
Stock Number: TR0889
Description: * Mac Don FD75 Flex Draper
* JD S-series adaptor
* Double knif
* Double finger reel
* Height sensors, in cab switch
* 45' wide
* John Deere o...
Updated: Wednesday, September 30, 2026 12:55 PM
Location: Tower City, North Dakota, USA
Seller: NorthStar Ag
Lot # 13913
2004 MAC DON 974
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:37 PM (CDT)
Width: 10.67 m
Serial Number: 165737
Condition: Used
Description: 2004 MacDon 974 35' Draper, Auger Pump Seal, Fits non latteral Gleaner Combines, Fore and Aft
Comes with Unverferth UT36 head cart
Updated: Wednesday, September 30, 2026 12:54 PM
Location: Cullom, Illinois, USA
Seller: Rediger Auction Service
Lot # 6057
2021 JOHN DEERE RD40F
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:34 PM (CDT)
Width: 12.19 m
Cutterbar Type: Flex
Contour: Yes
Air Reel: Yes
Serial Number: 1H0RD40FHM0815737
Condition: Used
Description: 2021 John Deere 40ft. platform excellent shape. Low Acres through it, always shed and always service properly. Very nice shape field ready. Good si...
Updated: Wednesday, September 30, 2026 12:50 PM
Location: Leland, Illinois, USA
Seller: Almburg Equipment Auctions
Lot # 6522
2013 JOHN DEERE S680
Combine Harvesters
Auction Ended:Wed, Sep 30, 2026 12:33 PM (CDT)
Serial Number: 1H0S680SPD0755660
Condition: Used
Description: 2013 John Deere S680,
S# 1H0S680SPD0755660,
Showing 3464 Engine Hrs & 2104 Separator Hrs,
13.5L 6 Cylinder Diesel Engine,
2 Speed Hydrostatic P...
Updated: Wednesday, September 30, 2026 12:50 PM
Location: Wahoo, Nebraska, USA
Seller: Dan Sanderson Auctioneers
Lot # 11270
2006 JOHN DEERE 635F
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:30 PM (CDT)
Width: 10.67 m
Cutterbar Type: Flex
Serial Number: H00635F717027
Condition: Used
Gathering Type: Auger
Description: john deere 635F
poly snouts
good floor
augur is good
we can load
Updated: Wednesday, September 30, 2026 12:46 PM
Location: Gibsonburg, Ohio, USA
Seller: Haar Brothers
Lot # 6062
2012 JOHN DEERE 630F
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:30 PM (CDT)
Width: 9.14 m
Cutterbar Type: Flex
Serial Number: 1H00630FJB0741478
Condition: Used
Stock Number: 16139
Fore/Aft Reel: Yes
Description: Selling a Functional Header.
30' Width.
Pickup Reel.
Single Point Hookup.
All Equipment sold is an ‘Absolute Sale’.
We take Trades on Auction ...
Updated: Wednesday, September 30, 2026 12:46 PM
Location: Phillipsburg, Kansas, USA
Seller: Midwest Equipment Auctions
Lot # 7988
2006 JOHN DEERE 630F
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:30 PM (CDT)
Width: 9.14 m
Cutterbar Type: Flex
Serial Number: H00630F716635
Condition: Used
Gathering Type: Auger
Description: John Deere 630F 30-foot flex head. Good working condition, field ready. Header trailer not included with the head, but will sell separately. Contac...
Updated: Wednesday, September 30, 2026 12:47 PM
Location: Nisland, South Dakota, USA
Seller: Harper Auction Co
Lot # 14264
2009 JOHN DEERE 630F
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:29 PM (CDT)
Width: 9.14 m
Serial Number: 731649
Condition: Used
Stock Number: 771649
Description: 2009 John Deere 630 platform, 30’ full finger, newer guards and sickle with new spare sickle in holder, always shedded, comes with 32’ Mauer head t...
Updated: Wednesday, September 30, 2026 12:46 PM
Location: Denison, Iowa, USA
Seller: Vetter Equipment - Denison
Lot # 5914
2012 CASE IH 3020
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:25 PM (CDT)
Width: 7.62 m
Cutterbar Type: Flex
Serial Number: YCZL59523
Condition: Used
Stock Number: BF202627
Gathering Type: Auger
Description: 2012 CASE IH MODEL 3020, 25' FLEX TERRA FLEX CUTTER BAR
HEAD HAS ADAPTOR AND EXTRA SHAFT TO FIX FLAGSHIP OR LEGACY COMBINE
EQUIPPED WITH SCH SICK...
Updated: Wednesday, September 30, 2026 12:42 PM
Location: Sutton, Nebraska, USA
Seller: Sutton Irrigation and Repair
Lot # 12776
2011 CASE IH 2162
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:24 PM (CDT)
Width: 12.19 m
Cutterbar Type: Flex
Serial Number: YBZN15494
Condition: Used
Gathering Type: Draper
Description: 2011 Case IH 2162 40' draper, CNH wide throat hook ups, single point, flip reel, header was on a combine that burnt, some heat damage to plastic an...
Updated: Wednesday, September 30, 2026 12:40 PM
Location: Huntington, Indiana, USA
Seller: Ayers Machinery
Width: 12.19 m
Contour: Yes
Serial Number: YCZN17297
Condition: Used
Stock Number: E00656008
Poly Skid Shoes: Yes
Description: AS IS, TRANSPORT, PLASTIC FINGERS, POLY SKIDS, REEL IS STRAIGHT, REEL TEETH ARE IN GOOD CONDITION, NEEDS ABOUT 5 KNIFE GUARDS, DRAPER RIBS ARE VISI...
Updated: Wednesday, September 30, 2026 12:39 PM
Location: Wishek, North Dakota, USA
Seller: Titan Machinery - Wishek
Lot # 6696
1996 NEW HOLLAND FX375
Self-Propelled Forage Harvesters
Auction Ended:Wed, Sep 30, 2026 12:22 PM (CDT)
Hours: 5,260
Kernel Processor: Yes
Serial Number: 2910075
Condition: Used
Header Included: Yes
Description: 1996 New Holland FX375, shows 2712 machine hours, 5260 engine hours. 6 row header. New paddles in chute, grass chute is installed, comes with kerne...
Updated: Wednesday, September 30, 2026 12:39 PM
Location: Vida, Montana, USA
Seller: Montana Auction Company
Lot # 3487
1991 CASE IH 1020
Platform Headers
Auction Ended:Wed, Sep 30, 2026 12:21 PM (CDT)
Serial Number: JJC0082345
Condition: Used
Description: 16.5 foot flex cutter bar, 1.5 inch knife, Hydraulic for/aft, Good pans and reel.
Updated: Wednesday, September 30, 2026 12:37 PM
Location: Ida Grove, Iowa, USA
Seller: Vetter Equipment - Ida Grove
Width: 6.1 m
Cutterbar Type: Flex
Serial Number: 004182
Condition: Used
Auto Reel Speed Control: Yes
Poly Skid Shoes: Yes
Description: Case IH 1020 bean head, 20 foot cut, 3 inch sickle sections. INCLUDED is homemade running gear head transport.
Updated: Wednesday, September 30, 2026 12:37 PM
Location: Sibley, Iowa, USA
Seller: Klaassen Realty & Auctions